Black Anti Corrosive Paint.
Black Anti Corrosive Paint All Purpose Black Paint is a solvent based, general purpose black paint. its used for waterproofing and weather protecting steel work, asphalt and wood.
you can also apply on concrete and potable water tanks. When dry it forms an odorless glossy film.
Anti-Corrosive All Purpose Black Paint forms a waterproof, weatherproof, corrosion resistant protective coating.
It is resistant to low concentrations of alkalies and acids and can withstand prolonged oxidation.
Anti-Corrosive All Purpose Black Paint is suitable for application to a wide variety of surfaces including mild steel, iron, lead, zinc, aluminum, concrete, stone and brick, and is used mainly for metal protection for any type of exterior metalwork—fire escapes, ladders, gutters etc, protecting drinking water tanks and as a protective coating for concrete structures, stone, brick, concrete screeds and sand cement surfaces.
SKP are a leading Manufacturer of Black Anti Corrosive Paint. normally provide Protection for all kinds of Mild Steel and iron structures.
Black anti corrosive paint a All Purpose Black Paint. best Quality corrosion resistant paint available in in super jet black paint. its manufactured By SKP India. and Supply All over World.
our black color anti corrosive paint its a type of corrosion resistant paint available in Glossy black color paint. SKP manufacturer of that paint in India.
| Form. | Black Color Brush able Liquid. |
| Density. | 1.10 |
| Flash-point. | 40°C |
| Application Temperature. | +5°C to +30°C |
| Service Temperature. | -10°C TO + 75°C |
| Coverage Approximately. | 10m2 / litre on smooth metal surface. |
| Storage Life. | 12 Months unopened. |
| Storage Temperature. | stored between 5°C and 25°C in original containers. |
SURFACE PREPARATION.
General Surface Preparation Care needs to be taken over preparation of surfaces before application. All surfaces must be free from oil, dirt, dust and loose debris.
On metal surfaces all loose rust should be removed using a wire brush and where advanced signs of corrosion are evident the area must be treated with a rust inhibitor.
